 |
Cedar Adirondack Table |
|
|
|
Cedar Adirondack Table |
|
(Click any photo for a close-up view)
Table with Straight Legs (Shown with Chair)
Table with Curved, Crossed Legs (Shown with Chair)
(Click any photo for a close-up view)
The Adirondack table has been designed to complement the lines of the Adirondack chair. The top of table is shaped to mirror the contours of the back slats on the chair. The top row of photos above shows a straight-leg version of the table, which is available in a large (shown) and a small size (see dimensions below). The second row of photos shows a curved-leg version of the table, which matches the design elements of the chair even further. This table is available in the large size only.
As with the Adirondack chairs, the table is assembled with water-proof exterior glue AND solid (not plated) stainless steel screws, which will never corrode or cause black streaks in the wood like other fasteners. You can elect to leave the cedar lumber untreated, which will weather over time into a nice silver-grey patina. If you would like to retain the golden brown appearance of the cedar, you can elect to add an exterior spar varnish finish to the table. This finish greatly extends the original appearance of the wood, although it should be recoated with varnish approximately every 5 years, depending on exposure to the elements.
Straight-leg table, Large size: 32" length, 20" wide, and 18" high
Straight-leg table, Small size: 24" length, 15" wide, and 18" high
Curved-leg table, Large size: 32" length, 20" wide, and 18" high
In addition to the table shown above, a matching Cedar Adirondack Chair is available. A complete Cedar Adirondack Set is also available at a discounted price. For other lumber choices besides cedar, see the main Adirondack furniture page.
$95 for large, straight-leg table; $80 for small, straight-leg table; $110 for large, curved-leg table. If desired, add $25 for 3 coats of exterior spar varnish to any of these table prices for added protection from the elements